[ILUG] Things

[Brian Cullen]

Too problems some of you may be able to advise me on folks:

1. I am getting the following message on my linux machine after a dirty
shutdown:

INIT id1 respawing too fast disabled for 5 minutes

I have looked at /etc/inittab and cannot see any problem. Does anyone have a
fix for this?



2. Also I have a DLT 8000 I cannot get to work, it sits off a SCSI 2940U2W
which when I do a cat /proc/scsi/scsi is not visable but when the machine
boots and the mothboard finds the SCSI card sees the DLT and assigns an ID.

Here is my /etc/conf.modules

alias eth0 pcnet32
alias scsi_hostadapter ips
alias scsi_hostadapter1 aic7xxx

So I am certain the 2940U2W is installed. Have tried to specifiy /dev/nst0
and /dev/st0 with tar, no luck.

Any help this novice?

Brian Cullen,
Systems Administrator,
Anglo Irish Bank
00353-1-6162376
00353-1-8132254


**********************************************************************
Private, Confidential and Privileged. This e-mail and any files and 
attachments transmitted with it are confidential and/or privileged.
They are intended solely for the use of the intended recipient. The 
content of this e-mail and any file or attachment transmitted with it
may have been changed or altered without the consent of the author. If
you are not the intended recipient, please note that any review, 
dissemination, disclosure, alteration, printing, circulation or 
transmission of this e-mail and/or any file or attachment transmitted
with it, is prohibited and may be unlawful. If you have received this 
e-mail or any file or attachment transmitted with it in error please
notify Anglo Irish Bank Corporation Plc, Stephen Court, 18/21 St 
Stephen`s Green, Dublin 2, Ireland, telephone no: +353-1-6162000.
**********************************************************************