[ILUG] Help with 3C59x, 2.4.16-smp, 3DLabs Oxygen GVX1 and IRQ10?
[ILUG] Help with 3C59x, 2.4.16-smp, 3DLabs Oxygen GVX1 and IRQ10?
John Gay
johngay at eircom.net
Wed Mar 6 00:45:22 GMT 2002
On Tuesday 05 March 2002 23:41, Paul Jakma wrote:
> On Tue, 5 Mar 2002, John Gay wrote:
> > It is. The settings on the PnP page of my Bios are:
>
> aha... try enabling it then. :)
>
> > So, I ask again, why won't the 2.4.16 kernel use my network card when the
> > 2.2.20 kernel does
>
> with the same Bios settings?
>
> dont know. could you give output of
>
> /proc/interrupts
With PnP off
CPU0 CPU1
0: 8283 8636 IO-APIC-edge timer
1: 160 143 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
5: 1548 1595 IO-APIC-edge Crystal audio controller
8: 0 2 IO-APIC-edge rtc
10: 0 0 IO-APIC-level eth0, usb-uhci
12: 57 62 IO-APIC-edge PS/2 Mouse
14: 93233 71471 IO-APIC-edge ide0
15: 0 6 IO-APIC-edge ide1
NMI: 0 0
LOC: 16833 16832
ERR: 0
MIS: 0
debian:/home/johngay#
With PnP on
debian:/home/johngay# cat interrupts.pnp_on
CPU0 CPU1
0: 9120 10185 IO-APIC-edge timer
1: 104 98 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
5: 2008 2220 IO-APIC-edge Crystal audio controller
8: 2 0 IO-APIC-edge rtc
10: 0 0 IO-APIC-level eth0, usb-uhci
12: 1797 2021 IO-APIC-edge PS/2 Mouse
14: 94449 75623 IO-APIC-edge ide0
15: 4 2 IO-APIC-edge ide1
NMI: 0 0
LOC: 19220 19218
ERR: 0
MIS: 0
debian:/home/johngay#
With 2.2.20 uni-processor kernel
debian:/home/johngay# cat interrupts.2.2.20pnp_off
CPU0
0: 14852 XT-PIC timer
1: 107 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 2487 XT-PIC Crystal audio controller
8: 2 XT-PIC rtc
9: 0 XT-PIC MPU-401 UART
10: 225 XT-PIC aic7xxx, aic7xxx, eth0, usb-uhci
12: 162 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 153526 XT-PIC ide0
15: 13 XT-PIC ide1
NMI: 0
debian:/home/johngay#
> lspci -vb | egrep '(^[0-9]|IRQ)'
With PnP off
debian:/home/johngay# cat lspcivb.pnp_off
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02)
(prog-if 00 [Normal decode])
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
30)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
01:00.0 Co-processor: 3DLabs GLINT Gamma G1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
01:00.1 Display controller: 3DLabs GLINT R3 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
debian:/home/johngay#
With PnP on
debian:/home/johngay# cat lspcivb.pnp_on
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02)
(prog-if 00 [Normal decode])
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
30)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
01:00.0 Co-processor: 3DLabs GLINT Gamma G1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
01:00.1 Display controller: 3DLabs GLINT R3 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
debian:/home/johngay#
With 2.2.20 Uni-processor
debian:/home/johngay# cat lspcivb.2.2.20pnp_off
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02)
(prog-if 00 [Normal decode])
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
30)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
01:00.0 Co-processor: 3DLabs GLINT Gamma G1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
01:00.1 Display controller: 3DLabs GLINT R3 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
debian:/home/johngay#
> lspci -v | egrep '(^[0-9]|IRQ)'
With PnP off
debian:/home/johngay# cat lspciv.pnp_off
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02)
(prog-if 00 [Normal decode])
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
30)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
01:00.0 Co-processor: 3DLabs GLINT Gamma G1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
01:00.1 Display controller: 3DLabs GLINT R3 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
debian:/home/johngay#
With PnP on
debian:/home/johngay# cat lspciv.pnp_on
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02)
(prog-if 00 [Normal decode])
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
30)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
01:00.0 Co-processor: 3DLabs GLINT Gamma G1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
01:00.1 Display controller: 3DLabs GLINT R3 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
debian:/home/johngay#
With 2.2.20 Uniprocessor
debian:/home/johngay# cat lspciv.2.2.20pnp_off
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02)
(prog-if 00 [Normal decode])
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
30)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
00:0c.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
Flags: bus master, medium devsel, latency 8, IRQ 10
01:00.0 Co-processor: 3DLabs GLINT Gamma G1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
01:00.1 Display controller: 3DLabs GLINT R3 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 193, IRQ 10
debian:/home/johngay#
>
> with and without PnP OS enabled. (its an smp kernel, right?)
>
Either way, I get no network on 2.4.16, but I do with 2.2.20?
> > I gave up Windows because I hate dual-booting, but right now, that's
> > the only way I can access the Internet AND my DVD. Boot 2.2.20 for
> > Internet access and re-boot 2.4.16 for DVD access : (
> >
> :(
> :
> > I'll worry about why my 32M GVX1 card runs tuxracer so slooooow later.
>
> it's using software OpenGL.
>
Even on a Dual PII 350 system with 512M of memory? it gets less than one
frame per second!
> > Cheers,
> >
> > John Gay
>
> --paulj
More information about the ILUG
mailing list Read this without the formatting . 
