[ILUG] VPN connection - The debuging of....

[Jason Corcoran]

Hi,

I have been looking at this on and off for the last three days. I have 
read the FAQ and contacted the Smoothwall and FreeSwan forums but no 
luck, thought I would chance my arm and see if anyone here can help.

I have a smoothwall box patch to the latest fixes including VPN pack III 
  and the OpenSwan.

Now I am trying to connect a RoadWarrior type client, which is nat'd. I 
can get the tunnel to come up and every thing looks good in the debug 
until I try to ping from the roadwarrior any machine (including the 
gateway) on my home network.

I think it is a routing problem, when I try and ping say, 192.168.0.2 (a 
machine on my internal network) I get a request timed out error, and no 
logs on the smoothwall box.

My routing table from my roadwarrior is:
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...02 00 00 00 01 00 ...... SSH Virtual NIC
0x1000004 ...00 04 75 c7 5d a3 ...... 3Com EtherLink PCI
===========================================================================
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
0.0.0.0          0.0.0.0   192.168.208.16  192.168.208.59  1
127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1	  1
192.168.208.0    255.255.255.0   192.168.208.59  192.168.208.59	  1
192.168.208.59  255.255.255.255        127.0.0.1       127.0.0.1  1
192.168.208.255  255.255.255.255   192.168.208.59  192.168.208.59  1
224.0.0.0        224.0.0.0   192.168.208.59  192.168.208.59	  1
255.255.255.255  255.255.255.255   192.168.208.59   2	  1
Default Gateway:    192.168.208.16
===========================================================================
Persistent Routes:
   None


And on the smoothwall is

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use 
Iface
192.168.208.59  194.125.87.1    255.255.255.255 UGH   0      0        0 
ipsec0
192.168.0.0     *               255.255.255.0   U     0      0        0 eth0
194.125.87.0    *               255.255.255.0   U     0      0        0 eth1
194.125.87.0    *               255.255.255.0   U     0      0        0 
ipsec0
default         194.125.87.1    0.0.0.0         UG    0      0        0 eth1

Can any body point me some where that will help me solve this.

Thanks
Jason.
-- 
________________________________________
Senior Software Engineer,
Activant Solutions Ltd.
Longford Ireland.

Email : Jason.Corcoran at Activant.com
Aim   : JasonCorcoran9
Http  : http://www.activant.com
Phone : + 353 (0) 43 49202