yep! thats it perfect! i'm emailing you from the 3 connection now...
the username/password, like you said, was 3ireland/3ireland. so now, step 2,
how do we add this info to the tutorial, it seems like a way easier way to
do it than to get into the ppp connections
On 30/08/2007, Fernando Ciciliati <ciciliati at gmail.com> wrote:
>> Hi Andrew,
>> Based on the settings you wrote, you could try:
>> # wvdial for Vodacom Data. Created by Tazz_tux
> # Version 1.0
>> # Change Log:
> # Added support for HSDPA.
> # Added Headers and version control.
> # Added trial settings for 3ireland.ie
>> [Dialer Defaults]
> Phone = *99#
> Username = username
> Password = password
> Stupid Mode = 1
> Dial Command = ATDT
>> [Dialer hsdpa]
> Modem = /dev/ttyUSB0
> Baud = 460800
> Init2 = ATZ
> Init3 = ATE0 V1 &D2 &C1 S0=0 +IFC=2,2
> ISDN = 0
> Modem Type = Analog Modem
> Init5 = AT+CGDCONT=1,"IP"," 3ireland.ie"
> About the username and password parameters, I don't know if their values
> are considered by the 3 authentication system...
>> If they are, I think you will have to figure them out.
> I would try 3ireland/3ireland as a start.
>> You can also install the stuff on Windows and look for some tip
> in the configuration files...
>> Good luck!
>>> > Hello everyone,
> > Just found you guys there today, would have been on this list ages ago
> if i
> > had known about it. I live in dublin and am an active developer with
> > So.. onto business ;) i found the guide to use the 3 usb modem and i
> > like to start a discussion with the author, Mikhail Ramendik. I don't
> > very much about this sort of connectivity but i would like to ask how
> > details provided would translate to the guide posted here ::
> > http://ubuntuforums.org/showthread.php?t=262867> >
> > the important part being the wvdial instructions:
> > # wvdial for Vodacom Data. Created by Tazz_tux
> > # Version 1.0
> > # Change Log:
> > #
> > # Added support for HSDPA.
> > # Added Headers and version control.
> > [Dialer Defaults]
> > Phone = *99***1#
> > Username = username
> > Password = password
> > Stupid Mode = 1
> > Dial Command = ATDT
> > [Dialer hsdpa]
> > Modem = /dev/ttyUSB0
> > Baud = 460800
> > Init2 = ATZ
> > Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > ISDN = 0
> > Modem Type = Analog Modem
> > and how that translates from the details provided on you're website :
> > OK ATE0V1&D2&C1S0=0+IFC=2,2
> > OK AT+CGDCONT=1,"IP"," 3ireland.ie"
> > OK ATDT*99#
> > CONNECT ""
> > to clarify my inquiry, i would like to know how to use the details
> > that you have provided in the context of wvdial
> > Thank you,
> > Andrew / real_ate
Maintained by the ILUG website team. The aim of Linux.ie is to
support and help commercial and private users of Linux in Ireland. You can
display ILUG news in your own webpages, read backend
information to find out how. Networking services kindly provided by HEAnet, server kindly donated by
Dell. Linux is a trademark of Linus Torvalds,
used with permission. No penguins were harmed in the production or maintenance
of this highly praised website. Looking for the
Indian Linux Users' Group? Try here. If you've read all this and aren't a lawyer: you should be!