Is it an onboard network card? and is the ram running in dual-channel mode?
Padraig
Daniel McInerney wrote:
> ethtool eth2 gives:
>> Settings for eth2:
> Supported ports: [ TP ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> Supports auto-negotiation: Yes
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> Advertised auto-negotiation: Yes
> Speed: 100Mb/s
> Duplex: Full
> Port: Twisted Pair
> PHYAD: 0
> Transceiver: internal
> Auto-negotiation: on
> Supports Wake-on: pg
> Wake-on: g
> Current message level: 0x000000ff (55)
> Link detected: yes
>>> Daniel.
>> Nick Murtagh wrote:
>> Daniel McInerney wrote:
>>>>> I added two gigs of ram to a workstation running debian lenny
>>> and when I booted the machine I had no network connectivity.
>>> ifconfig returned a similar IP address: 169.254.*.* and the following
>>> is now in syslog:
>>>>>>> Adding RAM shouldn't break your network - any chance there was
>> a new kernel installed via updates that become active when you
>> rebooted?
>>>> What does
>>>> # ethtool eth2
>>>> show? (Run as root)
>>>>>
Maintained by the ILUG website team. The aim of Linux.ie is to
support and help commercial and private users of Linux in Ireland. You can
display ILUG news in your own webpages, read backend
information to find out how. Networking services kindly provided by HEAnet, server kindly donated by
Dell. Linux is a trademark of Linus Torvalds,
used with permission. No penguins were harmed in the production or maintenance
of this highly praised website. Looking for the
Indian Linux Users' Group? Try here. If you've read all this and aren't a lawyer: you should be!
