[ILUG] Digital cam woes

[Padraig Kitterick]

Yeah, follow Kae's advice as it is a USB mass-storage dev:

su
mkdir /media/vivitar
mount /dev/sdb1 /media/vivitar

P.

David Jamison wrote:
> Hi
> 
> Entire syslog reads.  didnt think this would be so complex!  Could end 
> up using Card reader!!
> 
> Jun 27 07:11:43 david-desktop kernel: [ 3324.312189] usb 2-2: new full 
> speed USB device using ohci_hcd and address 3
> Jun 27 07:11:43 david-desktop kernel: [ 3324.409525] usb 2-2: 
> configuration #1 chosen from 1 choice
> Jun 27 07:11:43 david-desktop NetworkManager: <debug> 
> [1214547103.616473] nm_hal_device_added(): New device added (hal udi is 
> '/org/freedesktop/Hal/devices/usb_device_784_1691_962000000000100').
> Jun 27 07:11:43 david-desktop kernel: [ 3324.518948] usbcore: registered 
> new interface driver libusual
> Jun 27 07:11:43 david-desktop NetworkManager: <debug> 
> [1214547103.896623] nm_hal_device_added(): New device added (hal udi is 
> '/org/freedesktop/Hal/devices/usb_device_784_1691_962000000000100_if0').
> Jun 27 07:11:43 david-desktop kernel: [ 3324.542407] Initializing USB 
> Mass Storage driver...
> Jun 27 07:11:43 david-desktop kernel: [ 3324.543926] scsi6 : SCSI 
> emulation for USB Mass Storage devices
> Jun 27 07:11:43 david-desktop kernel: [ 3324.544946] usbcore: registered 
> new interface driver usb-storage
> Jun 27 07:11:43 david-desktop kernel: [ 3324.544952] USB Mass Storage 
> support registered.
> Jun 27 07:11:43 david-desktop kernel: [ 3324.545308] usb-storage: device 
> found at 3
> Jun 27 07:11:43 david-desktop kernel: [ 3324.545310] usb-storage: 
> waiting for device to settle before scanning
> Jun 27 07:11:48 david-desktop kernel: [ 3326.815308] usb-storage: device 
> scan complete
> Jun 27 07:11:48 david-desktop kernel: [ 3326.819038] scsi 6:0:0:0: 
> Direct-Access     Vivitar  ViviCam 5010          PQ: 0 ANSI: 5
> Jun 27 07:11:48 david-desktop kernel: [ 3326.836276] sd 6:0:0:0: [sdb] 
> 499712 512-byte hardware sectors (256 MB)
> Jun 27 07:11:48 david-desktop kernel: [ 3326.839456] sd 6:0:0:0: [sdb] 
> Write Protect is off
> Jun 27 07:11:48 david-desktop kernel: [ 3326.839459] sd 6:0:0:0: [sdb] 
> Mode Sense: 17 00 00 08
> Jun 27 07:11:48 david-desktop kernel: [ 3326.839461] sd 6:0:0:0: [sdb] 
> Assuming drive cache: write through
> Jun 27 07:11:48 david-desktop kernel: [ 3326.851259] sd 6:0:0:0: [sdb] 
> 499712 512-byte hardware sectors (256 MB)
> Jun 27 07:11:48 david-desktop kernel: [ 3326.854438] sd 6:0:0:0: [sdb] 
> Write Protect is off
> Jun 27 07:11:48 david-desktop kernel: [ 3326.854441] sd 6:0:0:0: [sdb] 
> Mode Sense: 17 00 00 08
> Jun 27 07:11:48 david-desktop kernel: [ 3326.854442] sd 6:0:0:0: [sdb] 
> Assuming drive cache: write through
> Jun 27 07:11:49 david-desktop kernel: [ 3326.854445]  sdb: sdb1
> Jun 27 07:11:49 david-desktop kernel: [ 3326.859036] sd 6:0:0:0: [sdb] 
> Attached SCSI removable disk
> Jun 27 07:11:49 david-desktop kernel: [ 3326.859068] sd 6:0:0:0: 
> Attached scsi generic sg2 type 0
> Jun 27 07:11:49 david-desktop NetworkManager: <debug> 
> [1214547109.055141] nm_hal_device_added(): New device added (hal udi is 
> '/org/freedesktop/Hal/devices/usb_device_784_1691_962000000000100_if0_scsi_host'). 
> 
> Jun 27 07:11:49 david-desktop NetworkManager: <debug> 
> [1214547109.057814] nm_hal_device_added(): New device added (hal udi is 
> '/org/freedesktop/Hal/devices/usb_device_784_1691_962000000000100_if0_scsi_host_scsi_device_lun0'). 
> 
> Jun 27 07:11:49 david-desktop NetworkManager: <debug> 
> [1214547109.074490] nm_hal_device_added(): New device added (hal udi is 
> '/org/freedesktop/Hal/devices/usb_device_784_1691_962000000000100_if0_scsi_host_scsi_device_lun0_scsi_generic'). 
> 
> 
> 
> Padraig Kitterick wrote:
>> Could you post the entire output of syslog from the moment the cam is 
>> plugged in, or is that uvcvideo message all there is?
>>
>> P.
>>
>> David Jamison wrote:
>>> I have a wee Vivitar Vivicam 5010 which connectes via USB I can see 
>>> the cam using dmesg  -  [ 4025.244709] uvcvideo: Found UVC 1.00 
>>> device ViviCam5010 (0784:0061) but it doesnt seem to be recognised in 
>>> the filesystem or by digiKam.
>>>
>>> Any thoughts?
>>>
>>> Also using Ubuntu 8.10 at the mo.  In the past if I inserted a cd or 
>>> any removable media an icon popped up on the desktop how can i turn 
>>> this on?
>>>
>>> Cheers
>>>
>>> D
>