From: Niall O Broin (niall at domain linux.ie)
Date: Mon 08 Oct 2001 - 11:04:07 IST
On Mon, Oct 08, 2001 at 01:13:55AM -0700, Ramon Diaz wrote:
> I recently installed SuSe 6.3 (kernel 2.2.13) in a
> spare box, and I have a conflict with my IRQ's. Both
> the network card and the modem have IRQ 10.
If they're both PCI devices then it shouldn't matter because the PCI design
allows for shared interrupts. I'd have a gut feeling that sharing IRQs on a
modem and network card wouldn't be absolutely the best configuration but
should work.
> Is there a way either through the GUI or using the
> actual terminal, to modify the IRQ?
Some PCI BIOSes will allow you to manipulate assignment of IRQs to slots.
If OTOH one or both of your devices is ISA you'll have to modify one of them
by using either jumpers or a program delivered with the hardware to change
the IRQ it uses, and if you're using software, it's likely that you'll need
to remove one of the devices while programming the other.
Niall
This archive was generated by hypermail 2.1.6 : Thu 06 Feb 2003 - 13:12:36 GMT