From: sean_odonnell at domain dsnsports.com
Date: Tue 03 Sep 2002 - 11:14:17 IST
ok , i did the following to set up the modem
setserial ttyS0 uart 16550A irq 4 port 0x03f8
ln -s ttyS2 modem
now you would think that that would have the modem on com 1,
but still not a peep from the bugger.
I have a mandrake box where the modem works,
anyone have any idea how i can check the settings
on the mandrake box to compare them???
Quoting Brian O'Donoghue <Brian.ODonoghue at domain kbs.ie>:
> > -----Original Message-----
> > From: sean_odonnell at domain dsnsports.com
> [mailto:sean_odonnell at domain dsnsports.com]
> > Sent: 03 September 2002 10:09
> > To: ilug at domain linux.ie
> > Subject: [ILUG] ipcop problem
> > I'm trying to replace a troublesome msproxy server with an ipcop box,
> > the only problem is the ipcop box wont pick up the modem.
> > I tried the modem out on a mandrake box, where it was picked up
> > (lots of blinky lights when dialing and so on), but ipcop just
> > doesnt seem to work with it. only the power light on.
> > the modem is a Microcomputer research , Inc Mr ISDN External (Serial
> > usb).
> > Their website only features windows drivers.
> > anyone have any ideas on how to kick it into life?
> > Thanks
> > Sean
> The Mr ISDN TA should just function as a normal serial modem with the
> exception that you will have to turn off vj compression in the options
> your ppp daemon.
> Vis-à-vis your specific problem with it not being detected <shrug>, you
> should make sure that your configuration files are pointing to
> /dev/ttyS0 or
> /dev/ttyS1 conducive with where it is the modem is attached to.
> Irish Linux Users' Group: ilug at domain linux.ie
> http://www.linux.ie/mailman/listinfo/ilug for (un)subscription
> List maintainer: listmaster at domain linux.ie
This archive was generated by hypermail 2.1.6 : Thu 06 Feb 2003 - 13:18:36 GMT