From: Padraig Brady (padraig.brady at domain corvil.com)
Date: Fri 20 Sep 2002 - 09:32:02 IST
kevin lyda wrote:
> ok, i've upgraded my kernel yet again. and i'm still getting errors
> on eth1. the ifconfig entries for eth[01] are:
>
> eth0 Link encap:Ethernet HWaddr 00:02:A5:07:13:63
> inet addr:192.168.7.31 Bcast:192.168.7.255 Mask:255.255.255.0
> inet6 addr: fe80::202:a5ff:fe07:1363/10 Scope:Link
> inet6 addr: 2002:3e11:a253:f100::1/64 Scope:Global
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:326144 errors:0 dropped:0 overruns:0 frame:0
> TX packets:262241 errors:0 dropped:0 overruns:0 carrier:0
> collisions:26 txqueuelen:100
> RX bytes:26219349 (25.0 Mb) TX bytes:302965993 (288.9 Mb)
> Interrupt:10 Base address:0xd000
>
> eth1 Link encap:Ethernet HWaddr 00:04:E2:2E:A8:DE
> inet addr:62.17.162.83 Bcast:62.17.162.95 Mask:255.255.255.240
> inet6 addr: 2002:3e11:a253:f101::1/64 Scope:Global
> inet6 addr: fe80::204:e2ff:fe2e:a8de/10 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:86618 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:104825 dropped:0 overruns:0 carrier:209650
> collisions:0 txqueuelen:100
> RX bytes:38277532 (36.5 Mb) TX bytes:0 (0.0 b)
> Interrupt:11 Base address:0xb800
>
> eth0 is the lan link. eth1 is connected to a cisco via a crossover cable.
The pertinent word here is cisco. You need to mess with your duplex settings,
as auto negotiation is broken with cisco usually.
Padraig.
This archive was generated by hypermail 2.1.6 : Thu 06 Feb 2003 - 13:18:58 GMT