From: Cathal Meehan (cathal.meehan at domain tecnomen.ie)
Date: Fri 03 Sep 1999 - 10:12:10 IST
Hi,
Just installed SuSE6.2 on a Toshiba laptop, but when I boot up it
fails to recognise by ethernet card. Now I know the card is supported (I
had SuSE 6.1 and RedHat 5.2 running on this machine in the past, and the
card was always recognised) but this time nothing. The following comes
up during boot up time . . .
Intel PCIC probe:
Toshiba ToPIC97 PCI-to-CardBus at bus 0 slot 11, mem 0x68000000, 2
sockets
host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [no pci
irq] [lat 168/176] [bus 20/20]
host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x80000002]
[no pci irq] [lat 168/176] [bus 21/21]
ISA irqs (default) = 3,4,5,7,9,10,12 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337
0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: excluding 0xd0000-0xdffff
cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcffff
cs: memory probe 0x0e0000-0x0effff: excluding 0xe0000-0xeffff
cs: memory probe 0x0f0000-0x0fffff: excluding 0xf0000-0xfffff
cs: unable to map card memory!
cs: unable to map card memory!
memory_cs: RequestWindow: Resource in use
Also when shutting down, it comes up saying "eth0: unknown device"
Does anyone have any idea as to what could be causing this. I've never
seen it before.
TIA, and sorry for the length,
cathal
-- How can we carry on When you are gone my wild one - Wild One, Philip Lynott
This archive was generated by hypermail 2.1.6 : Thu 06 Feb 2003 - 13:04:31 GMT